0 Items
BioKill-60 Auto

BioKill-60 Auto

review
5
0
5
Your Price: $2,200.00
In Stock.
Part Number:BK-60
  • Removes damage from flood, smoke, accidents.
  • Molecularly dismantles chemicals, odors, mold, and pathogens.
  • Purifies Automatically for 60 Minutes. Neutralizes sterilant.
  • Walk-away, auto shut-off

Feature:

Ports for 2.5 inch flex tube attachment

Feature:

Light and Portable

Feature:

Designed for Homeowner Use

BioKill-60 Auto      Runs Automatically

Simple and easy to use, BioKill-60 Auto is the perfect equipment for homeowners and businesses to remove smoke and water damage from wildfires and to destroy-inactivate virus particles brought in from the outside. With the push of a button the equipment runs automatically, purifying for 1 hour. During the treatment period it runs unattended, oxidizing odor molecules mold and mildew, viruses and bacteria using clean ozone made by the unit and powerful hydroxyl radicals produced inside with ultraviolet germicidal irradiation and advanced nano-crystal technology.

What It Does BioKill-60 Auto is a premiere disinfectant that generates temporary clean ozone to oxidize contaminants. It is also effective against microorganisms because when they repel from the oxidant they are sucked into the unit and destroyed by the powerful hydroxyl field and germicidal irradiation inside. (The cleaning technologies attack organic molecules, including living cells, so the treatment area must be unoccupied while it cleans.)

Regulatory BioKill is a general use disinfectant. There are numerous published research reports confirming that ozone gas, hydroxyl radicals, and ultraviolet germicidal radiation will destroy or irreversibly inactivate virus particles on inanimate hard surfaces and objects when applied in an unoccupied treatment area. However, application for Disinfectant Classification of BioKill-60 Auto to the EPA is still in process although the manufacturer is aregistered pesticide device-producing establishmentwith the EPA.

How It WorksThis equipment uses “suspend and eradicate technology” rather than relying on basic “ozone burn” like other products. It works by first dislodging contaminant molecules (odors, mold, mildew, bacteria, virus) from the surfaces where they cling, suspending them in flowing air that is then sucked into the unit. Inside they impact a special screen where they are permanently destroyed. To accomplish this BioKill® starts with ozone, created cleanly from natural air. The ozone reaches around corners and into crevices to temporarily dislodge contaminants coated on surfaces. Once suspended in the flowing air, the contaminants are carried into the BioKill® where they impact a screen covered with free radicals. Those highly reactive chemical species aggressively pull electrons out of all the contaminants long chain carbon molecules, disassembling their organic matter. Once started, the dismantling process cascades, eventually eradicating all the contaminants fragments, reverting their matter back to the natural elements from which they were composed, primarily carbon, nitrogen hydrogen, and oxygen. The eradication process is instant at the molecular level, without residue. The unit is essentially self-cleaning.

BioKill® creates “clean ozone” in a closed treatment area, unlike basic ozone machines which need outside air. (Those use an electric spark that also creates toxic nitric oxide unless the air going into them is carefully pre-dried, and their spark-jump plates must be continuously removed and cleaned.) BioKill® is self-contained, requires no air drying or plate cleaning, creates no toxic side effect chemicals, and actually uses moisture in normal air to help create its powerful dismantling species. It is rated at 10,000 mg/hour ozone output, which raises the concentration of a test chamber to over 150 parts per million in just a few minutes! But instead of relying on its strong ozone production alone to inactivate some contaminants, BioKill™ follows through to eradicate all contaminants once they’ve been dislodged by its clean ozone.

Viruses are small, independent particles, built of crystals and macromolecules. Unlike bacteria, they multiply only within the host cell. Viruses have no protections against oxidative stress. Normal mammalian cells, on the other hand possess complex systems of enzymes (i.e., superoxide dismutase, catalase, peroxidase), which tend to ward off the powerful effects of free radical species and oxidative challenge.

Disinfection by ozone occurs through rupture of the pathogen’s enclosing wall. An ozone level of 0.4 ppm for 4 minutes has been shown to destroy any virus, bacteria, mold and fungus.Ozone will inactivate viruses on contact, even at low residual concentrations.In case of polio, only 0.012 ppm removes all virus particles in less than 10 seconds.

Most research efforts on ozone's virucidal effects have centered upon ozone's propensity to break apart lipid molecules at sites of multiple bond configuration. Once the lipid envelope of the virus is fragmented, its DNA or RNA core cannot survive. Aside from its well-recognized action upon unsaturated lipids, ozone can also interact with certain proteins and their constituents, namely amino acids. Indeed, when ozone comes in contact with capsid proteins, protein hydroxides, protein hydroxides and protein hydroperoxides are formed.Ozone destroys viruses by diffusing through the protein coat into the nucleic acid core, resulting in damage of the viral RNA. At higher concentrations, ozone even destroys the capsid or exterior protein shell by oxidation.

Numerous families of viruses including poliovirus I and 2, human rotavruses, Norwalk virus, Parvoviruses, and Hepatitis A, B and non-A non-B?, among many others, are susceptible to the virucidal actions of ozone.Non-enveloped viruses (Adenoviridae, Picornaviridae, namely poliovirus, Coxsachie, Echovirus, Rhinovirus, Hepatitis A and E, and Reoviridae (Rotavirus), have also begun to be studied.Viruses that do not have an envelope are called "naked viruses." They are constituted of a nucleic acid core (made of DNA or RNA) and a nucleic acid coat, or capsid, made of protein.

BioKill-60 Auto generates clean ozone for disinfection of viruses on any inanimate hard surface or object. In a cubic meter test chamber the BioKill-60 Auto generates a clean ozone concentration of 100 parts-per-million in the first 14 minutes of timed operation. ItDOES NOTrequiredryingof input air like small, spark gap ozone devices that also generate caustic nitrogen dioxide and nitric acid in moist air. BioKill-60 Auto works well in moist (water damage) places, andDoes Notrequire their periodic “plate cleaning” so essential for basic ozone devices. No residue of the destroyed contaminants from BioKill-60 Auto purification is visible afterward.

The technologies in BioKill-60 Auto also work well on bacteria and fungi. The BioKill-60 Auto rids rooms and vehicles of mildew and occupancy odors from perspiration, children, pets, and chemical smells. It can be used with fixed property to remove surface mold and mildew caused by water leaks andflooding,or with automobiles, trucks, and RV’s to remove occupancy odors including portable toilet smells.The BioKill-60 Auto uses ultraviolet radiation (UVC) to generate its hydroxyl radicals. UVC alone is an excellent line-of-sight disinfectant technology that degrades the RNA and DNA of pathogens passing through its strong photoelectric field, destroying their ability to replicate.

Operating - Simple To Use The BioKill-60 Auto is typically placed in an unoccupiedclosed room or vehicleto be treated and is connected to mains AC power. When the 1 hour ON button is pushed itruns automatically for 60 minutes,going through its timed cycle unattended, automatically shutting off after 1 hour (unless it’s switched off earlier). Treated premises can be reoccupied soon afterward because during the last ten minutes it neutralizes any ozone remaining in the treatment area.

5 Stars
Easy to use
Easy to use. Push a button, walk away, return later. I use it to freshen new listings for residential real estate brokerage. It works !
Reviewed by:  from Orlando, FL. on 6/30/2018
5
5 Stars
Basement game room
Works great on my often musty basement game room. Keeps smell and mold growth away. Run it every few months. Easy as pie.
Reviewed by:  from Charlottesville, VA. on 11/25/2017
5